U.S. Steel planning use of electric furnace |
Local Stories

U.S. Steel planning use of electric furnace

U.S. Steel Corp. intends to use an electric furnace and scrap metal to produce steel for the first time in decades, a process that would be more efficient and less costly than the company’s more traditional methods for steelmaking.

Executives on a conference call with Wall Street analysts Tuesday said they have identified $175 million in cost reductions as part of the company’s Carnegie Way initiative to improve results.

The electric furnace would replace an aging blast furnace at a plant in Fairfield, Ala., that would require at least $100 million in upgrades, CEO Mario Longhi and other U.S. Steel executives told analysts.

Once engineering and other studies are completed and the project is approved by the company’s board of directors, construction could start later in 2015 and be completed by mid-2017, Longhi said.

“The business case for this project as we see it today is strong … and I will be prepared to move forward in the fastest possible manner,” Longhi said.

U.S. Steel’s comments were made a day after the Pittsburgh-based steelmaker reported its fifth consecutive year of losses. Longhi, who was promoted to CEO last year, has been examining ways to improve the company’s performance.

“Putting in the electric furnace for the pipe mill will make them a lot of money,” said analyst Charles Bradford of Bradford Research Inc. in New York. “It comes down to the price of scrap, which I feel is headed lower. This is a move they had to make.”

Traditionally an integrated producer, U.S. Steel uses a blast furnace, iron ore and coke in the steelmaking process. Making steel in an electric furnace is usually cheaper than using a blast furnace, Bradford said.

Longhi said using an electric furnace would improve U.S. Steel’s ability to use other mills more fully. “It would improve our raw materials position for iron ore and coal … reduce capital spending and maintenance costs … and cut transportation costs.”

U.S. Steel has not operated an electric furnace in at least 20 years, at a former plant in Baytown, Texas, Bradford said. A U.S. Steel spokeswoman did not know when the company used one.

The electric furnace would be used to feed a seamless tubular pipe mill that the company operates at Fairfield, and allow it to move flat-rolled production to other mills. Flat-rolled is used in automobiles and appliances.

The company is under pressure to improve its stock and financial performance. The savings executives mentioned include $100 million from new, unidentified projects and $75 million that was announced in October, mainly related to the shutdown of a steelmaking plant at its Hamilton Works in Hamilton, Ontario, closing two aging coke plants at its Gary, Ind., works and other moves.

Of that total, $150 million in cost reductions will be realized in 2014, said Chief Financial Officer David B. Burritt, who wouldn’t identify specific sources of the new cost cuts for competitive reasons.

“We are examining all aspects of our business,” Burritt said of the Carnegie Way initiative, previously called Project Carnegie. “We are going to make struggling businesses profitable or admit we can’t and exit them.”

During the conference call, an analyst asked Longhi if upgrades to the aging flat-rolled mill at the Irvin Works in West Mifflin might be considered. Longhi said the company is studying such things, which may make it a “very interesting operation going into the future.” He declined to say more.

U.S. Steel reported a fourth-quarter loss of $122 million on Monday, the result of one-time expenses, even though all of its steelmaking segments were profitable.

The Pittsburgh-based steelmaker’s loss equaled 84 cents a share, and compared with a loss of $50 million, or 35 cents a share, in the same period a year ago. Revenue for the three months declined to $4.27 million from $4.49 million a year ago.

U.S. Steel shares closed down 11 cents at $25.34.

John D. Oravecz is a staff writer for Trib Total Media. He can be reached at 412-320-7882 or [email protected].

TribLIVE commenting policy

You are solely responsible for your comments and by using you agree to our Terms of Service.

We moderate comments. Our goal is to provide substantive commentary for a general readership. By screening submissions, we provide a space where readers can share intelligent and informed commentary that enhances the quality of our news and information.

While most comments will be posted if they are on-topic and not abusive, moderating decisions are subjective. We will make them as carefully and consistently as we can. Because of the volume of reader comments, we cannot review individual moderation decisions with readers.

We value thoughtful comments representing a range of views that make their point quickly and politely. We make an effort to protect discussions from repeated comments either by the same reader or different readers

We follow the same standards for taste as the daily newspaper. A few things we won't tolerate: personal attacks, obscenity, vulgarity, profanity (including expletives and letters followed by dashes), commercial promotion, impersonations, incoherence, proselytizing and SHOUTING. Don't include URLs to Web sites.

We do not edit comments. They are either approved or deleted. We reserve the right to edit a comment that is quoted or excerpted in an article. In this case, we may fix spelling and punctuation.

We welcome strong opinions and criticism of our work, but we don't want comments to become bogged down with discussions of our policies and we will moderate accordingly.

We appreciate it when readers and people quoted in articles or blog posts point out errors of fact or emphasis and will investigate all assertions. But these suggestions should be sent via e-mail. To avoid distracting other readers, we won't publish comments that suggest a correction. Instead, corrections will be made in a blog post or in an article.