Westmoreland County manufacturing firms find success in specialization |

Westmoreland County manufacturing firms find success in specialization

Jeff Himler
Shane Dunlap | Tribune-Review
Machinist and technician Randi Kmieciak works with a computer-aided filament winding machine Friday, Nov. 17, 2017 at C-K Composites in Mt. Pleasant. The company was started in 1956 and changed names to C-K Composites in 1985. The part Kmieciak and her colleagues were constructing is a test tube for high voltage equipment.
Shane Dunlap | Tribune-Review
Nick Pletcher, a machinist with C-K Composites, helps work on tubes for the agitation systems in wastewater treatment facilities Friday, Nov. 17, 2017 at the Mt. Pleasant manufacturer.
Shane Dunlap | Tribune-Review
C-K Composites president Al Bartek poses for a photo with a mockup of a breakable approach tower for airport runways Friday, Nov. 17, 2017 at C-K Composites in Mt. Pleasant. The tower is designed to easily fall apart if hit or clipped by airplanes and is one of many products the company in Westmoreland County creates.
Shane Dunlap | Tribune-Review
Andy Guy, a machinist and manufacturer, works on creating a steam engine at Jenson Steam Engines in Jeannette. (Trib photo)
Christian Tyler Randolph | Tribune-Review
Darcy Smouse, co-owner at C. Palmer Mfg. Co., in West Newton, Pa. on Thursday Nov. 16, 2017.
Christian Tyler Randolph | Tribune-Review
A mold for pizzelles is constructed at C. Palmer Mfg. Co. in West Newton, Pa. on Thursday Nov. 16, 2017.
Christian Tyler Randolph | Tribune-Review
A mold for pizzelles is constructed at C. Palmer Mfg. Co. in West Newton, Pa. on Thursday Nov. 16, 2017.
Christian Tyler Randolph | Tribune-Review
Darcy Smouse, co-owner at C. Palmer Mfg. Co., in West Newton, Pa. on Thursday Nov. 16, 2017.
Christian Tyler Randolph | Tribune-Review
Molds for pizzelles is constructed at C. Palmer Mfg. Co. in West Newton, Pa. on Thursday Nov. 16, 2017.

Thin, anise-flavored pizzelles are a traditional Italian treat — and one that may not have caught on in all corners of America if not for a Westmoreland County company that has made the irons that shape the distinctive waffle-like cookies since 1938.

Started by Italian immigrant Carmen Palmieri in his West Newton basement, C. Palmer Manufacturing is now run by the third generation of the family. It’s one of a number of little-heralded businesses in the county that turn out a variety of far-reaching products — exemplifying the spirit of National Entrepreneurship Month and of American Made Month, both celebrated in November.

Palmieri’s granddaughter, Darcy Smouse, is in charge at the C. Palmer plant in South Huntingdon, where a small, experienced staff can finish and assemble more than 130 aluminum pizzelle irons each day. Everything but the electrical elements of the irons is made in the United States, she said.

Over the years, the company has expanded its product line.

“We get a lot of work out of here,” Smouse said. “In the fourth quarter, it’s pizzelle irons; in the first two quarters, we do finials for aluminum fencing. Our camping line of sandwich toasters starts revving up in May and June.”

The company also produces Belgian cookie irons, ravioli molds and pierogie makers. Hempfield’s Biscotti Brothers uses the company’s irons to make its popular pizzelles, Smouse said.

C. Palmer, which has a tool and die shop, has a symbiotic relationship with a more highly automated die casting plant in Oakland, Md., run by Smouse’s brother, Phillip Palmieri.

“I rely on him to do my casting,” Smouse said. “He relies on me to build his dies.”

Little engines that could

Jensen Steam Engines is another long-lived family company that has found success with a unique product. The small Jeannette firm, in operation since 1932, makes miniature steam engines as educational toys and collectibles for hobbyists.

Its handful of employees includes Dorita Guy, a 31-year veteran who fields phone calls and assists with production.

Guy said the engines are built one at a time, using brass and steel.

“We sell to colleges and universities, and a lot to avid steam lovers,” she said.

.lemonwhale-embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width:100%; }.lemonwhale-embed-container iframe { position: absolute; top: 0; left:0; width: 100%; height: 100%; }

The company has a familiar backstory. It was founded by immigrant Thomas Jensen Sr., who arrived from Denmark and initially worked in his basement.

Guy said workers still use the original jigs and tools created by Jensen, but they’ve managed to streamline the production process with the reintroduction of the company’s large Model 50 power plant. It’s capable of producing one-tenth horsepower and lighting a small lamp.

“We have an order for 20 of them, and we have six of them out so far in about eight months,” Guy said. “It used to take six months to a year to make one.”

Towering workload

Most of C-K Composites’ products do their work behind the scenes, incorporated into the products or systems of clients in the medical, industrial, utility or military fields.

President Allan Bartek said items made in the company’s 80,000-square-foot Mt. Pleasant Township plant include cast resin bushings that transfer electrical power for large computer data centers and tubes made of wound fiberglass filaments that support sensors on MRI medical imaging machines. The fiberglass tubes are ideal for that application, Bartek said, because “they’re very stiff and very precise.”

The company developed one of its most visible products in 1979, in cooperation with the Federal Aviation Administration. Bartek said orange fiberglass towers that support approach lights at airports, including one in Columbus, Ohio, are designed to withstand high winds and snow loads but will break away if struck by the wing of an off-target plane.

“If it touches one of them, it will basically disintegrate rather than taking the airplane down,” he said.

The company, founded in 1956, has survived several changes in name, ownership and affiliation. Since Bartek’s arrival in 1994, C-K has doubled its staff to 50 employees. He hopes to continue that growth with a new twist on the company’s original line — wood laminates.

He said a manufacturer of archery bows has expressed interest in the colored, extra-dense layers of birch wood, which also would be suited for custom gun stocks.

Opening doors

Belgian immigrant Patrick Mercier closed one door more than a decade ago, when he sold the company he developed to manufacture sensors for automatic doors. After a five-year noncompetitive agreement lapsed, he opened a new door, re-entering the same field as founder and CEO of Tucker Auto-Mation, based in North Huntingdon.

“I decided to come back to the industry, this time to manufacture the entire (automatic) door package,” Mercier said. “I’m not making the sensors anymore. I buy them from my previous company.”

Mercier won accolades for his entrepreneurship at his former company, which captured an 80 percent market share.

He hopes to repeat that success in the North American market.

“I’m trying to compete as a new start-up against all the big door manufacturers,” he said.

The potential is there, he believes, noting North America is behind Europe and particularly Asia in the use of automated entry systems. He pointed out that U.S. public facilities, including many dining establishments, have an incentive to catch up because of national regulations on handicapped accessibility.

Mercier said Tucker’s growing clientele includes hospitals and pharmaceutical labs, Duke University, Giant Eagle supermarkets and At Home retail outlets, He’s angling for a chance to bid on door contracts for major construction projects by UPMC and at Pittsburgh International Airport.

Jeff Himler is a Tribune-Review staff writer. Reach him at 724-836-6622, [email protected] or via Twitter @jhimler_news.

TribLIVE commenting policy

You are solely responsible for your comments and by using you agree to our Terms of Service.

We moderate comments. Our goal is to provide substantive commentary for a general readership. By screening submissions, we provide a space where readers can share intelligent and informed commentary that enhances the quality of our news and information.

While most comments will be posted if they are on-topic and not abusive, moderating decisions are subjective. We will make them as carefully and consistently as we can. Because of the volume of reader comments, we cannot review individual moderation decisions with readers.

We value thoughtful comments representing a range of views that make their point quickly and politely. We make an effort to protect discussions from repeated comments either by the same reader or different readers

We follow the same standards for taste as the daily newspaper. A few things we won't tolerate: personal attacks, obscenity, vulgarity, profanity (including expletives and letters followed by dashes), commercial promotion, impersonations, incoherence, proselytizing and SHOUTING. Don't include URLs to Web sites.

We do not edit comments. They are either approved or deleted. We reserve the right to edit a comment that is quoted or excerpted in an article. In this case, we may fix spelling and punctuation.

We welcome strong opinions and criticism of our work, but we don't want comments to become bogged down with discussions of our policies and we will moderate accordingly.

We appreciate it when readers and people quoted in articles or blog posts point out errors of fact or emphasis and will investigate all assertions. But these suggestions should be sent via e-mail. To avoid distracting other readers, we won't publish comments that suggest a correction. Instead, corrections will be made in a blog post or in an article.