Tech creations find home at Pittsburgh Mini Maker Faire at Children's Museum |

Tech creations find home at Pittsburgh Mini Maker Faire at Children's Museum

Philip G. Pavely | Tribune-Review
Gabriel Berke Williams of Boston captures bubbles with his camera on the North Side Sunday August 18, 2013 at the third annual Pittsburgh Mini Maker Faire at the Children's Museum of Pittsburgh.
Philip G. Pavely | Tribune-Review
Owen Schneider of Shaler gets a bubble explosian in his face on the North Side Sunday August 18, 2013 as part of the third annual Pittsburgh Mini Maker Faire at the Children's Museum of Pittsburgh.
Philip G. Pavely | Tribune-Review
Amelia Porter Bacon, 15, of O'Hara competes in a tetherball tournament on the North Side Sunday August 18, 2013. as part of the third annual Pittsburgh Mini Maker Faire at the Children's Museum of Pittsburgh.

A wood trebuchet flung water balloons as artists demonstrated 3D printing technology.

They were surrounded by crafts, computers and electronics, and more robots than a “Star Wars” movie.

Dozens of do-it-yourself makers assembled Sunday at the Children's Museum of Pittsburgh in the North Side for the third annual Pittsburgh Mini Maker Faire, showing off technological creations to families from across the region.

Among them were the Girls of Steel, an all-female robotics team demonstrating their Frisbee-tossing, pyramid-climbing robot that made it to a national robotics competition in St. Louis this year.

The high school girls, dressed in blue flannel shirts and red bandanas like the iconic Rosie the Riveter, had six weeks to build their robot before a regional competition held each year at University of Pittsburgh.

“It teaches you a lot about problem solving,” said Simran Parwani, a junior at Fox Chapel Area High School and team member for the past two years.

The remote-controlled and battery-powered contraption drives and maneuvers in multiple directions, and can fire off several Frisbees up to about 20 feet in rapid succession.

Rachel Round, a home-schooled senior team member, estimated the 40-girl team spent more than 25 hours a week designing and building the robot starting in January. The team, which has shop space at Carnegie Mellon University and obtains corporate sponsorships to finance the team, competes in events set up by FIRST, a national group that organizes robotics competitions for high school teams around the country.

Bill Schlageter, director of marketing for the Children's Museum, said 75 vendors set up displays at this year's faire, which was more than expected. The museum space and outside grounds were teeming with children and their parents.

Schlageter said the event aims to inspire both children and adults to try building their own creations. Organizers hope the faire sparks interest for children in science, math and engineering, he said.

“Hopefully they walk away saying, ‘I'm going to roll up sleeves and try to make something,' ” he said.

Ryan Bates, 26, an electrical engineer from Crafton, was displaying home-made video-game consoles modeled on arcade games of the 1980s and '90s.

Since 2009, Bates has built 10 game cabinets using old computers and displays, and parts he orders from the Internet. His website,, shows several of his creations.

Although he sold a few of them, his goal is to form a business by selling kits.

“I'm hoping it will turn into something more than a hobby,” he said.

Alex Nixon is a staff writer for Trib Total Media. He can be reached at 412-320-7928 or [email protected].

TribLIVE commenting policy

You are solely responsible for your comments and by using you agree to our Terms of Service.

We moderate comments. Our goal is to provide substantive commentary for a general readership. By screening submissions, we provide a space where readers can share intelligent and informed commentary that enhances the quality of our news and information.

While most comments will be posted if they are on-topic and not abusive, moderating decisions are subjective. We will make them as carefully and consistently as we can. Because of the volume of reader comments, we cannot review individual moderation decisions with readers.

We value thoughtful comments representing a range of views that make their point quickly and politely. We make an effort to protect discussions from repeated comments either by the same reader or different readers

We follow the same standards for taste as the daily newspaper. A few things we won't tolerate: personal attacks, obscenity, vulgarity, profanity (including expletives and letters followed by dashes), commercial promotion, impersonations, incoherence, proselytizing and SHOUTING. Don't include URLs to Web sites.

We do not edit comments. They are either approved or deleted. We reserve the right to edit a comment that is quoted or excerpted in an article. In this case, we may fix spelling and punctuation.

We welcome strong opinions and criticism of our work, but we don't want comments to become bogged down with discussions of our policies and we will moderate accordingly.

We appreciate it when readers and people quoted in articles or blog posts point out errors of fact or emphasis and will investigate all assertions. But these suggestions should be sent via e-mail. To avoid distracting other readers, we won't publish comments that suggest a correction. Instead, corrections will be made in a blog post or in an article.