Archive

ShareThis Page
Removal of ceramics molds part of demolition work underway at Tarentum building | TribLIVE.com
Valley News Dispatch

Removal of ceramics molds part of demolition work underway at Tarentum building

Brian C. Rittmeyer
559545vnddepotdemo122218
Brian C. Rittmeyer | Tribune-Review
Amanda Anderson, of Greensburg, an employee with American Architectural Salvage, tosses a ceramic mold onto a pile outside a building on Fifth Avenue in Tarentum that had housed a ceramics business on Tuesday, Dec. 18, 2018. The building is being emptied and gutted to be redeveloped as a community center called 'The Depot.'
559545vnddepotdemo3122218
Brian C. Rittmeyer | Tribune-Review
Amanda Anderson, with American Architectural Salvage, removes a ceramics mold from a lift on Tuesday, Dec. 18, 2018. Crews cut a hole in the first floor of the building on Fifth Avenue in Tarentum to most easily remove the molds from the basement.
559545vnddepotdemo2122218
Brian C. Rittmeyer | Tribune-Review
Thousands upon thousands of ceramics molds had filled the basement of the former Joan’s Kiln Korner & Gifts on Fifth Avenue in Tarentum. They are being removed and discarded as part of the building’s renovation into a community center.
559545vnddepotdemo4122218
Brian C. Rittmeyer | Tribune-Review
Ceramics molds for a variety of characters and things rest against the side of the former Joan’s Kiln Korner & Gifts on Fifth Avenue in Tarentum on Tuesday, Dec. 18, 2018. The discarded molds, for which no buyer could be found, are destined to be used as fill.

Demolition work is underway inside an empty Tarentum building its backers hope will become a community center and a catalyst for economic renewal in the borough.

The work at what will will be called “The Depot” involves gutting the interior of the Fifth Avenue building, which previously housed a ceramics business, ready it for redevelopment.

That will include removing the wall paneling and tin ceiling, removing a partial mezzanine floor and — most notably — emptying the basement of thousands upon thousands of molds that had been used to make the ceramics that had been sold there.

“It is the first real work on the project with contractors paid to work on the building,” said David Rankin, an elder at Central Presbyterian Church who launched the nonprofit Faith Community Partners in 2015, the same year he bought the building. “It’s a necessary step. It will be good to get this behind us and move forward.”

Rankin said they tried for three years to sell the molds, which date to the 1960s.

While the finished ceramics leftover in the building were sold, Rankin said they could not find anyone interested in taking large quantities of the molds. While some expressed interest in a few of them, Rankin said there were just too many to sell that way.

“It was impossible to try to meet those kind of needs,” he said, noting that they were not labeled.

Crews with American Architectural Salvage, part of Westmoreland Community Action, are working on the demolition.

Westmoreland Community Action chief executive officer Tay Waltenbaugh heads Keystone Hope Development, which was founded in 2016 and came on as the project’s developer and will oversee construction.

To remove the molds from the basement, crews cut a hole in the first floor and installed a lift.

The molds have been piled outside against the side of the building. They are destined to become clean fill, Rankin said.

The work started Dec. 11, and is expected to run into mid-January, said Rick Mills, a demolition manager with American Architectural Salvage.

What will happen next depends on funding, Rankin said. They are awaiting word on a $70,000 state grant that would pay half the cost of a new roof and a stormwater removal solution.

Getting that grant money will open the doors to more, Rankin said.

“We’re not going to start anything else until we have funding in place,” he said.

The Depot is expected to house a laundromat, coffee shop and rooms for community service organizations. A courtyard will be in an empty lot alongside the building, where the new entry will be.

While he previously hoped to be in the finished building in the fourth quarter of 2019, Rankin isn’t sure if that estimate is still accurate. “It will depend on funding,” he said.

The ceramics shop, Joan’s Kiln Korner & Gifts, had been started by Tarentum Councilwoman Carrie Fox’s aunt, Joan Golgan. Her mother and father, Barbara Magnetta and late former Tarentum Mayor Carl Magnetta, took it over after her death from cancer in 1984.

Fox said she started helping her aunt at the shop when she was just 8 years old. Seeing the molds piled against the building was emotional for her.

“I grew up there. My children grew up there,” she said. “It just brings back a lot of memories. It’s sad to see them that way.”

Fox said her father had once estimated there were 70,00- to-80,000 molds in the basement. Golgan had started the business and began accumulating molds at her home before ultimately moving into that building.

“That whole basement, it was filled from top to bottom,” she said. “No one could believe it until they went downstairs and looked.”

While she got rid of molds that were no longer usable, she otherwise didn’t get rid of old molds because she was a supplier and people would come to her, Fox said.

While many of the molds are now broken or no longer complete, Fox said she looked through the pile and grabbed a few for Easter eggs, which she can make with the kiln at her home.

“It’s nice to see something happening (with the building),” Fox said. “I’m happy to see it. You want to see that come to life. He’s had the plan for quite some time. It’s really nice to see it come true.”

Brian Rittmeyer is a Tribune-Review staff writer. You can contact Brian at 724-226-4701, [email protected] or via Twitter @BCRittmeyer.

TribLIVE commenting policy

You are solely responsible for your comments and by using TribLive.com you agree to our Terms of Service.

We moderate comments. Our goal is to provide substantive commentary for a general readership. By screening submissions, we provide a space where readers can share intelligent and informed commentary that enhances the quality of our news and information.

While most comments will be posted if they are on-topic and not abusive, moderating decisions are subjective. We will make them as carefully and consistently as we can. Because of the volume of reader comments, we cannot review individual moderation decisions with readers.

We value thoughtful comments representing a range of views that make their point quickly and politely. We make an effort to protect discussions from repeated comments either by the same reader or different readers

We follow the same standards for taste as the daily newspaper. A few things we won't tolerate: personal attacks, obscenity, vulgarity, profanity (including expletives and letters followed by dashes), commercial promotion, impersonations, incoherence, proselytizing and SHOUTING. Don't include URLs to Web sites.

We do not edit comments. They are either approved or deleted. We reserve the right to edit a comment that is quoted or excerpted in an article. In this case, we may fix spelling and punctuation.

We welcome strong opinions and criticism of our work, but we don't want comments to become bogged down with discussions of our policies and we will moderate accordingly.

We appreciate it when readers and people quoted in articles or blog posts point out errors of fact or emphasis and will investigate all assertions. But these suggestions should be sent via e-mail. To avoid distracting other readers, we won't publish comments that suggest a correction. Instead, corrections will be made in a blog post or in an article.